موزعون معتمدون لمنتجات تراي كيم
منتجات شركة تراي كيم – الحل المثالي للعزل المائي متوفر جميع منتجات تراي كيم أسمنتي – ايبوكسي – مواد ربط – حقن -لاصق سيراميك – سقيه سيراميك – منتجات تسويه الاراضي
منتجات تراي كيم معتمدة من الهيئة القومية لمياه الشرب والصرف الصحي وتُستخدم في مشاريع البنية التحتية الكبرى في مصر. نوفرها بتوريد مباشر من الشركة.
تراي كيم من أهم شركائنا المعتمدين في حلول العزل والإيبوكسي وكيماويات البناء، ونستخدم منتجاتها في عدد كبير من المشاريع
TRI-CURE SB
Resin based concrete curing compound.
Description
TRI-CURE SB is a curing compound used for spraying into the surface of concrete to provide an effective and economical method of curing, and prevention of premature water loss in concrete.
Learn More
TRI-GLASS BEADS
Reflective road marking glass beads.
Description
TRI-GLASS BEADS greatly increase road marking reflectivity and improve the durability of road marking paints.
Learn More
TRI-P RED
Red iron oxide anti-corrosion coating for iron and steel.
Description
TRI-P RED is a one-component alkyd-based red iron oxide primer designed to provide effective anti-corrosion protection for steel and iron surfaces.
Learn More
TRI-PRIMER 1010
Multi-purpose Epoxy Primer.
Description
TRI-PRIMER 1010 is a two-component epoxy primer designed to provide high-quality adhesion before epoxy or polyurethane coatings and for repairing concrete floor cracks.
Learn More
TRI-SEALER 900 W
Good Quality Silicone Water Repellent.
Description
TRI-SEALER 900 W is one component water base silicone Water repellent with a low viscosity solution for exterior use. Suitable for direct application to new untreated brick, tile, concrete cement, fiber cement and other porous siliceous materials.
Learn More
TRI-SEALER AC
Solvent base Acrylic sealer and curing compound.
Description
TRI-SEALER AC is a one component, solvent base, clear sealer and curing compound depend on acrylic resin and high selected solvents.
Learn More
TRI-ACRY PROOF
Elastomeric acrylic waterproofing & protective coating
Description
Tri-Acryproof is a single component, elastomeric acrylic waterproofing and protective coating. Upon curing, it forms a tough, flexible and durable coating which is resistant to UV and other weathering agents.
Learn More
TRI-BITU PROOF R
Rubberized Bitumen Emulsion Waterproofing Coating
Description
Tri-Bitu Proof R is a brown/black liquid blend of selected bitumens emulsified with water to provide an easily applied protective waterproofing coating.
Learn More
TRI-CEMENT PUTTY
Two component polymer modified cement putty for concrete & masonry
Description
Tri-Cement Putty is a two component cement putty product modified with special polymer to give a fair surface before applying a paint coat and also can be used as a repair for rough concrete and masonry surface.
Learn More
TRI-COAT E 400
Non-toxic solvent-free protective epoxy coating for concrete and steel
Description
Tri-Coat E 400 is a two component, solvent-free, non-toxic protective floor and wall coating based on epoxy resin and specially selected curing agents.
Learn More
TRI-COAT E450
Non-toxic, solvent-free epoxy coating for concrete and steel
Description
Tri-Coat E450 is a two component, solvent-free protective coating based on epoxy resin, pigments and specially selected curing agents, designed for continuous protection against chemical attack and abrasion resistance.
Learn More
TRI-COAT T500
High performance coal tar extended epoxy resin coating
Description
Tri-Coat T500 is a two component, coal tar extended, solvent-based epoxy formulated to provide a coating containing inert reinforcing fillers and a special blend of solvents.
Learn More
TRI-CONCRETE FIBER G
Glass Synthetic Fiber for Concrete
Description
Tri-Concrete Fiber G is a glass synthetic fiber mesh which is introduced into concrete.
Learn More
TRI-FLEX PU 50
High Modulus Polyurethane Sealant.
Description
TRI-FLEX PU 50 is a single-component polyurethane elastomer construction sealant for use in building joints. Primer is not required on anodized aluminum and mortar.
Learn More
TRI-FLEX PU 50
High Modulus Polyurethane Sealant.
Description
Tri-Flex PU 50 is a single-component polyurethane elastomer construction sealant for use in building joints. Primer is not required on anodized aluminum and mortar.
Learn More
TRI-FLEX PU
High Modulus Polyurethane Sealant.
Description
TRI-FLEX PU is a single-component polyurethane elastomer construction sealant for use in building joints. Primer is not required on anodized aluminum and mortar.
Learn More
TRI-GROUT AG
High Flowable, Non-Shrinkage Cementitious Grouting Mortar
Description
Tri-Grout AG is a pre-mixed, ready-to-use, high-quality non-shrink cementitious grouting mortar. It is a blend of cement, fillers, quartz aggregates and specially selected chemical additives. When mixed only with water, it produces a flowable grout with controlled expansion and high compressive strength.
Learn More
TRI-HARD TOP
Surface Hardening Compound for Fresh Concrete Floors
Description
Tri-Hard Top is a quality-controlled, factory-blended surface hardening compound supplied as a ready-to-use powder. It consists of hard-wearing aggregates, Portland cement and special additives that improve workability and provide excellent abrasion and wear resistance.
Learn More
TRI-LATEX LS
Bonding Agent Between Old and New Concrete
Description
Tri-Latex LS is a modified styrene butadiene rubber emulsion supplied as a ready-to-use white liquid. It improves the quality of cementitious mortars and slurries and is suitable for both internal and external applications.
Learn More
TRI-LATEX SBR
Bonding Agent Between Old and New Concrete
Description
Tri-Latex SBR is a modified styrene butadiene rubber emulsion supplied as a ready-to-use white liquid. It improves the quality of cementitious mortars and slurries and is ideal for internal and external applications in conjunction with cement.
Learn More
TRI-SEAL 307
Flexible Protective and Water-proofing Coat.
Description
TRI-SEAL 307 is a two-component, polymer-modified cementitious coating designed to provide long-lasting waterproofing and concrete protection. It forms a flexible, crack-bridging film that resists both positive and negative hydrostatic pressure. Once cured, it becomes an integral part of the concrete surface, offering superior adhesion, resistance to chlorides, sulfates, and carbonation. The system is safe for potable water, easy to apply by brush, roller, spray, or trowel, and suitable for both new and existing structures.
Learn More
TRI-WATER STOP
PVC Joint Sealing Waterbars
Description
Tri-Water Stop is a flexible PVC waterbar designed to seal construction and expansion joints in concrete structures. It is available in different sizes and profiles to suit various applications.
Learn More
TRI-BITU PROOF S
Bituminous Waterproofing Coating
Description
Tri-Bitu Proof S is a viscous liquid blend of BF4 bitumen in solvent that dries to form a tough, high-quality waterproof bitumen film. It provides an effective barrier against water and water vapor and is suitable for damp-proofing, below-ground concrete protection, concrete curing, and corrosion protection for metal surfaces.
Learn More
TRI-BITU PROOF W
Bitumen Emulsion Waterproofing Coating
Description
Tri-Bitu Proof W is a brown/black liquid blend of selected bitumens emulsified with water to provide an easily applied protective coating. It dries to form a tough black waterproof membrane that is also resistant to the passage of water vapor.
Learn More
TRI-GROUT HF
General Purpose Non-Shrink Cementitious Grout
Description
Tri-Grout HF is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state while minimizing water demand. The low water demand ensures high early strength, while the graded fillers provide uniform mixing and consistent grout performance.
Learn More
TRI-POLYSEAL
Two Component Polysulphide Sealant
Description
Tri-Polyseal is a two-component joint sealant based on a liquid polysulphide polymer. When mixed and applied, it cures to form a tough rubber-like seal with excellent adhesion to primed concrete, glass, aluminum and steel.
Learn More
TRI-MORTAR 3030
High Quality Chemical Resistant Epoxy Mortar
Description
Tri-Mortar 3030 is a high-quality, three-component, solvent-free epoxy mortar formulated with epoxy resin, hardeners, selected fillers and chemical additives. It provides excellent adhesion, non-shrink performance, high anchoring strength and outstanding chemical resistance for repairing concrete, masonry and tile surfaces.
Learn More
TRI-POXY 2002
Two-Component Modified High Elastic Polyurethane Epoxy for Joint & Crack Repair and Coating
Description
Tri-Poxy 2002 is a solvent-free, two-component modified polyurethane epoxy system designed for crack repair, joint filling and protective floor coatings. It provides excellent adhesion, durable repairs and high elasticity, making it ideal for cold and freezing environments exposed to significant temperature variations.
Learn More
TRI-COAT AL 100
Alkyd Base Coating
Description
Tri-Coat AL 100 is a one-component alkyd-based coating for interior and exterior applications. It is suitable for concrete, wood and primed steel surfaces and is available in a wide range of standard and custom colors upon request.
Learn More
TRI-COAT 1001 F
Solvent-Free Modified Epoxy Coating for Freezing Areas
Description
Tri-Coat 1001 F is a two-component, solvent-free, slightly thixotropic protective floor and wall coating based on modified epoxy resin and specially selected curing agents. It is available in standard colors, with special colors available upon request.
Learn More
TRI-COAT PU
Two-Component Polyurethane Coating
Description
Tri-Coat PU is a colored or transparent two-component aliphatic polyurethane coating that provides excellent gloss, UV resistance and color retention. It is available in standard colors, with custom colors available upon request.
Learn More
TRI-BITU PROOF W
Bitumen Emulsion Waterproofing Coating
Description
Tri-Bitu Proof W is a brown/black liquid blend of selected bitumens emulsified with water to provide an easily applied protective coating. It dries to form a tough black waterproof membrane that is also resistant to the passage of water vapor.
Learn More
TRI-COAT SBM
Great Performance Matt Walling Epoxy Resin Solvent-Based Protective Coating
Description
TRI-COAT SBM is a two-component, solvent-based protective coating based on epoxy resin, solvents, pigments and specially selected curing agents. It is designed for continuous protection against chemical attack and abrasion resistance. Available in standard colors, with special colors available upon request.
Learn More
TRI-COAT W 100
Two-Component Water-Based Epoxy Coating for Concrete Surfaces
Description
Tri-Coat W 100 is a high-solids, two-component water-based epoxy floor and wall coating designed for concrete surfaces. It offers excellent resistance to oil, solvents and harsh cleaning chemicals, withstands heavy traffic and is available in both high-gloss and matte finishes.
Learn More
TRI-FLOOR 1001 F
Solvent-Free Modified Epoxy Coating for Freezing Areas
Description
TRI-FLOOR 1001 F is a two-component, solvent-free, slightly thixotropic protective floor and wall coating based on modified epoxy resin and specially selected curing agents. It is available in standard colors, while special colors can be supplied upon request.
Learn More
TRI-P E
Anti-Corrosion Primer Coating for Iron and Steel
Description
Tri-P E is a one-component alkyd coating modified with zinc phosphate to provide excellent anti-corrosion protection for iron and steel. It is suitable for steel structures, reinforced concrete, bridges, workshops, garages, warehouses and exposed reinforcing steel.
Learn More
TRI-P F
Anti-Corrosion Primer, Fast-Cure Coating for Iron and Steel
Description
Tri-P F is a one-component alkyd coating modified with zinc phosphate to provide fast-curing anti-corrosion protection for iron and steel. It is suitable for steel structures, reinforced concrete, bridges, workshops, warehouses, garages, stairs and exposed reinforcing steel.
Learn More
TRI-PRIME 1001 F
Two-Component Solvent-Free Epoxy Primer for Epoxy Floor Coatings
Description
Tri-Prime 1001 F is a two-component, low-viscosity epoxy primer based on modified epoxy resin, curing agents and specially selected additives. It provides excellent adhesion, elasticity and durability before applying epoxy or polyurethane top coats on concrete surfaces, especially in cold and freezing environments.
Learn More
TRI-ROAD MARKING EP 270
Two-Component Solvent-Based Epoxy Road Marking Paint
Description
Tri-Road Marking EP 270 is a two-component, solvent-based epoxy road marking paint formulated to provide durable, high-performance markings with excellent adhesion and resistance to traffic and weather conditions.
Learn More
TRI-SEALER 903S
High-Quality Siloxane Solvent-Based Water Repellent
Description
Tri-Sealer 903S is a high-performance, one-component siloxane-based water repellent that deeply penetrates porous substrates. It provides long-lasting water repellency while allowing water vapor to diffuse, making it ideal for protecting concrete, masonry and other mineral surfaces.
Learn More